DCT | Test and Measurement

Welcome to our new site! Feel free to report any issues, contact us at [email protected]

EX1200-3608

The EX1200-3608 and EX1200-3604 provide eight or four independent channels of a digital to analog converter (DAC) with 16 bits of resolution.

Send Enquiry

Features

  • 8 Channel, 400 kSa/s DAC/AWG
  • 4 or 8 independent, isolated 16-bit D/A converters per instrument
  • Ideal for simulating thermocouples and other sensor outputs ±20 V, ±10 V, ±1 V, ±0.1 V output ranges
  • ±20 V, ±10 V, ±1 V, ±0.1 V output ranges
  • 400 kSa/s arbitrary waveform generation with internal programmable clock
  • 400 kSa/s arbitrary waveform generation with internal programmable clock
  • Synchronize level changes with input measurements to facilitate test sequencing

Overview

The EX1200-3608 and EX1200-3604 provide eight or four independent channels of a digital to analog converter (DAC) with 16 bits of resolution. Two on-board DACs allow these modules to achieve fine resolution at very low output range settings. Along with static output operation, the DAC modules provide an arbitrary waveform generation (AWG) mode, which supports sophisticated looping and branching to build complex waveforms without the system controller’s intervention. The data may be paced out of the instrument with output rates up to 400 kSa/s.

Each channel is isolated, true-differential and has sense lines that can be used to compensate for voltage drops that occur over the length of the lead wire between the DAC output and the device under test. Channels can be connected in series to produce outputs in excess of 20 V.

When using the EX1200 scanning measurement feature, the DAC levels can be programmed at the beginning of each scan step. This powerful feature provides the basis for test sequencing completely independent of the host controller, where analog outputs are synchronized with measurement inputs.

Leave a Reply

Your email address will not be published. Required fields are marked *

Enjoy:

Send Enquiry For:

EX1200-3608

Israel's Leading Businesses Choose DCT

Israel's Leading Businesses Choose DCT

DCT’s Skilled Management Team has more than twenty-five years of experience and expertise in the local business environment, coupled with a highly motivated group of employees, positions us as the preferred supplier among the major customers in the industry.

DCT Competitive Edge is the prompt response to our customer needs, the online and on-site direct technical support, professional consulting for the best cost/performance solution, on-time delivery, long-term maintenance, and support.

We can get back to you!

Need a Rugged Device?

Fill in the form!

A variety of tablets are available for all use cases.
- only solutions - No obligations -

Our experts can help you find just about anything.

What Were You Looking For? Let us help.